Results 1 to 10 of 10
Thread: Pre-Season Engine drama
-
27th December 2025, 11:49 #1Senior Member
- Join Date
- May 2015
- Location
- Greenwich, London UK
- Posts
- 3,787
- Like
- 25
- Liked 840 Times in 694 Posts
Pre-Season Engine drama
Rumour has it that Mercedes has built a monster engine, and Redbull have a similar concept. It is looking like a Mercedes Engine dominance is coming. This may be good for McLaren, but I suspect Mercedes may be the team to beat if the rumour is correct.
I am curious to see how the Ford engine in the Redbull hold up to the competition. Car giant Ford have alway built championship-winning F1 engines in the past, but times have changed as Honda found in the early stages of their return to F1.
I wonder if the championship is going to be fought between the Mercedes-powered cars. The Ferrari may have chassis challenges to overcome, but I expect the Ferrari engine to be up there with the Mercedes. The embarrassment that Ferrari has suffered in the 2025 season may drive them to produce a better car that may surprise everyone. They obviously need more than a better car to win championships. The need to carry out a major overhaul of their operation side, l feel.Better a witty fool than a foolish wit.
William Shakespeare
- Likes: N. Jones (31st December 2025)
-
27th December 2025, 21:54 #2Senior Member
- Join Date
- Sep 2020
- Location
- Wichita, Kansas U.S.A
- Posts
- 933
- Like
- 17
- Liked 239 Times in 189 Posts
For those who may not know what is going on. Mercedes has found a loophole that allows them to run their engines at a higher compression ratio (18:1 vs. 16:1). This will ultimately give them approximately 15 HP greater. RB may also be going down this path.
The other engine makers (Ferrari, Honda, and Audi) are asking FIA to intervene before the season and stop it.
If the FIA changes its procedures for evaluating engines, the RB and Mercedes could be crippled. FIA had pushed out a compromise that they will run with the 2026 rules and then change them for 2027. Ferrari is said to have filed a protest.
- Likes: Nitrodaze (29th December 2025)
-
27th December 2025, 23:01 #3Senior Member
- Join Date
- Dec 2022
- Posts
- 220
- Like
- 6
- Liked 69 Times in 46 Posts
-
28th December 2025, 00:06 #4Senior Member
- Join Date
- Mar 2004
- Posts
- 3,005
- Like
- 12
- Liked 410 Times in 237 Posts
I've also seen a rumour that Adrian Newey has found a loophole that gives more downforce than should be expected from the new chassis/floor regulations. We could be in for a repeat of the Brawn double-diffuser protests and appeals as well as an argument over engines.
-
28th December 2025, 00:32 #5Senior Member
- Join Date
- May 2015
- Location
- Greenwich, London UK
- Posts
- 3,787
- Like
- 25
- Liked 840 Times in 694 Posts
-
28th December 2025, 01:13 #6Senior Member
- Join Date
- Aug 2001
- Posts
- 6,380
- Like
- 784
- Liked 821 Times in 588 Posts
Alleged cheating, alleged advantage. At this point it's nothing more than claims really.
And I fully expect this to be less messy in terms proving compression ratio, but just as if not more messy in terms of proving that they knew it would be deemed illegal if found and are by that reasoning cheating. Just like with the Ferrari fuel flow loopholes, it might be simply too hard to prove.
And I suspect that if the FIA clamps down hard on the Article 1.5 basis that "Formula 1 cars must comply with these regulations in their entirety at all times during a competition"..... well the only compression ratio testing during the competition takes place in the pits, at ambient temps. To introduce another test is to change the regs, and I might add that if they decided on a way to heat the engines to near operating temps, the other teams might have higher CRs as well. Intentional or not, if they break 16:1..... but wait, they can't do that because they have already changed the regulation to allow that testing. It's a slippery slope.
I personally think the reduction in compression ratio was done on insane theory already. If Audi or anyone else new doesn't want to invest in figuring that out, they weren't that invested in F1 to begin with, and we shouldn't reduce the potential output to appease them and make it easier.
Hard to say how it will all go down, but the most recent precedent I can think of is DAS. And even though it was known that DAS existed based on a loophole, the FIA let Merc run it for the year, as well as allowed others to develop it if they wanted. But with engine homologation a different beast, the FIA might be in a position to deem it simply legal or not.
-
28th December 2025, 18:17 #7Senior Member
- Join Date
- May 2015
- Location
- Greenwich, London UK
- Posts
- 3,787
- Like
- 25
- Liked 840 Times in 694 Posts
I think they may have a tough time proving the compression ratio is illegal. Afterall, teams are using very similar alloys for the conrod and piston. And these things would expand under increased temperatures. That said, no one knows what materials Mercedes is using for their engine parts. It would be a sad day if regulations started specifying what materials should be used for all engine components.
I wonder how such an engine would work on the desert race tracks.Last edited by Nitrodaze; 28th December 2025 at 23:10.
Better a witty fool than a foolish wit.
William Shakespeare
-
28th December 2025, 23:09 #8Senior Member
- Join Date
- May 2015
- Location
- Greenwich, London UK
- Posts
- 3,787
- Like
- 25
- Liked 840 Times in 694 Posts
-
29th December 2025, 01:14 #9Senior Member
- Join Date
- Aug 2001
- Posts
- 6,380
- Like
- 784
- Liked 821 Times in 588 Posts
Well I haven't seen the mention of what Newey might have found, but just forum members on F1Technical have found loopholes in the aero package regs that seem would easily change the idea of outwash being unlikely. I'm sure a guru like Newey has been deep into just about any possibility.
-
Yesterday, 18:53 #10Senior Member
- Join Date
- Aug 2001
- Posts
- 6,380
- Like
- 784
- Liked 821 Times in 588 Posts
I suspect that *IF* we ever find out that the rumors are true, the metals that expand will be used in very limited areas. As you say, all metals expand with temperature, but for the most important areas this has been factored in so that the engine is at it's best under full operating temperature. As such bores, pistons, rods, valves, bearings would likely not change over how they were designed. Otherwise it would probably result in either increased engine wear or excess friction.
BUT we have areas which could expand slightly with heat and not impact wear or friction in a negative way.
*IF* they do dig in enough to find out if the rumors are true, I'm primarily suspecting various coated surfaces within the actual combustion chamber area and/or the TJI/HCCI prechamber areas, primarily the nozzles. Piston crowns, valve faces, and the various prechamber components could expand without impacting tolerances beyond what is desired to raise compression ratio.
*IF* the rumors have merit, it would take expansion that would decrease the chamber area of each cylinder by a bit less that one cubic centimeter. With a large bore as well as large valves there is a decent bit of surface area to play with, and it might be possible.
It will be interesting to see what comes out of the FIA meeting, but I have a feeling that it might end up like the Ferrari engine saga. Clarifications and changes forced, but nothing ever proven that the public gets to see.


Reply With Quote

That is the shame of all shames.
[WRC] Rally Sweden 2026