Well there's the root of your problem :mark:
Printable View
Well there's the root of your problem :mark:
OK!! I tried the compressed air in the water reservoir to try to flush the system out but it didn't work. At the moment, I have to wait three minutes and then operate the washer, and it will only spray on the passenger side.
Does anyone else here have any ideas to help me?
That's what I meant. At least in my car the hoses look like they can be easily taken off and put back on again.Quote:
Originally Posted by Starter
thumbs uphttp://www.camcorderdcr.com
Valve, the lines are clogged with mineral deposits from using tap water. You can try pumping vinegar through the lines. Vinegar, a mild acid, will disovle the minerals. Although, this may take several attempts.
Otherwise, replace the lines :dozey:
OK! I think the guy at the local garage solved the issue. He fitted a nozzle attachment to his compressed air line, and blew that into the windscreen washer outlets. This, plus a lot more flushing of the system eventually solved the problem. The soapy sudsy water lasted a long, long time. There was also some slimy stuff in the system. My final blowing out with the compressed air finally at the nozzle outlets blew water out of the reservoir. I then filled it with clean water. The water spray is still slightly soapy. I will continue to use the washers regularly every time I go out to try to continue to flush out the system.
The lesson here is:"NEVER PUT CONCENTRATED DETERGENT INTO YOUR WINDSCREEN WASHER RESERVOIR".
Was it household detergent or the special stuff for screen washers you used?
I have a similar problem with my rear washer - it just doesn't work. The garage say that it would be uneconomic to try anything as it means removing so much trim to get at the pipe.
It was the concentrated washing up detergent - whatever you do, never, NEVER put that stuff into you windscreen washer reservoir.Quote:
Originally Posted by D-Type