Is there some sort of conversion kit for hooking up a Blu-ray and surround sound system that has HDMI to an older set that doesn't have HDMI? Any advice would be greatly appreciated.
Thanks.
Is there some sort of conversion kit for hooking up a Blu-ray and surround sound system that has HDMI to an older set that doesn't have HDMI? Any advice would be greatly appreciated.
Thanks.
It doesn't have SCART plugs? Most unusual. If not then not really without expensive converters cheaper to get a new set, DVD player or BluRay with a SCART plug.
What inputs does the TV have?
Do you have any outputs from the audio that will work? Many units have both analog and digital output so you can pass through them.
SCART? Uh... Uh... I... Uh... Huh?
The old set is an early Samsung HD 1080i (I think I got it in 2001-02 or so) and the only outputs and inputs I see are coaxials, S-video out and standard A/V inputs and outputs like on the old stereo systems.
The set works fine, no more than I watch TV in the living room. I have a newer HD set in the bedroom with all the newer inputs and outputs (HDMI, USB, PC, Digital Audio, etc.) but the system I got is too much for that room. When I bought the Blu-ray/surround sound system, I just never thought about the TV having completely obsolete connections.
So I'm pretty much screwed and have to get a new set?
If the old TV is HD, it should work fine. It should even work if the old TV is standard def. Most blu ray players are made so they will also play standard CDs - you just don't get the hiigh definition part.Quote:
Originally Posted by Jag_Warrior
What connections are on the back? Standard coax? S video? The three cable type - red, white and yellow plugs?
On the back of the old set I have coax, S-video out and standard A/V inputs and outputs. I began getting kind of depressed at how things were looking so I called Worst Buy and the sales rep said I was basically SOL... unless I found some kind of Chinese made adapter off Ebay (or where ever) that may or may not work. Really bummed right now. I got a good deal on the Blu-ray/surround system but I never even considered what my input/output situation was on the old TV set. D@mn modern technology!
Jag_Warrior, what brand/models are the tv and BR-player? or could you try to take a picture of the backside of both?
If your Blu-Ray doesn't have analogue output (SCART, Component etc), which a lot of them don't for copy protection reasons, then you're stuffed without a converter. HDMI and SCART are totally different systems so there's no such thing as an adaptor or cable without active components in it - but honestly there's nothing to gain by going down that route.
You should find plenty of cheap TVs in the sales after xmas :p
TV without SCART? Not since the 80's!
Jag, google "hdmi to component conversion" and you should find what you're looking for :)